Biosorption of copper(II) and zinc(II) from aqueous solution by Pseudomonas putida CZ1

To study Pseudomonas putida CZ1, having high tolerance to copper and zinc on the removal of toxic metals from aqueous solutions, the biosorption of Cu(II) and Zn(II) by living and nonliving P. putida CZ1 were studied as functions of reaction time, initial pH of the solution and metal concentration. It was found that the optimum pH for Zn(II) removal by living and nonliving cells was 5.0, while it was 5.0 and 4.5, respectively, for Cu(II) removal. At the optimal conditions, metal ion biosorption was increased as the initial metal concentration increased. The adsorption data with respect to both metals provide an excellent fit to the Langmuir isotherm. The binding capacity of living cells is significantly higher than that of nonliving cells at tested conditions. It demonstrated that about 40-50% of the metals were actively taken up by P. putida CZ1, with the remainder being passively bound to the bacterium. Moreover, desorption efficiency of Cu(II) and Zn(II) by living cells was 72.5 and 45.6% under 0.1M HCl and it was 95.3 and 83.8% by nonliving cells, respectively. It may be due to Cu(II) and Zn(II) uptake by the living cells enhanced by intracellular accumulation.     

粉煤灰与几种酸固相反应特性的表面分析

用扫描电镜．能量色散谱研究了粉煤灰与酸的固相反应过程中表面形貌和化学组成变化特性。室温下粉煤灰分别与HCI、HNO3、H2SO4、HCIO4固相反应后，表面产生直径20—200nm的结晶颗粒或晶柱。反应生成的水溶物结晶体的扫描电镜图像分别呈手指状、龟背形、蛛蛛状、蝙蝠态，分别为氯化铝铁混晶、硝酸铝铁混晶、硫酸铝铁混晶和高氯酸铝铁混晶。粉煤灰是硅、铝、铁等元素的氧化物聚集体，铁铝等氧化物主要分布在颗粒表面，氧化硅主要分布在颗粒内层。用少量酸进行固相反应这些氧化物聚集体可相互剥离，用H2SO4处理粉煤灰优先将铁铝氧化物转化成可溶性硫酸盐。     

Determination of Levofloxacin in Human Urine with Capillary Electrophoresis and Fluorescence Detector

In this study, we developed an analytical method for the enantioseparation of ofloxacin, using capillary electrophoresis with fluorescence detection. The optimum background electrolyte was obtained to be 60 mM hydroxylpropyl‐β‐cyclodextrin (HP‐β‐CD) in 50 mM phosphate buffer at pH 2.30. Under these conditions, the (+) and (‐) ofloxacin were completely separated, with the detection limit of 10 nM when the sample was prepared in deionized water. The linear ranges of levofloxacin in deionized water and untreated urine were 10^?7 to 5 × 10^?3 M with R² = 0.9989 and 5 × 10^?6to 5 × 10^?3 M with R² = 0.9943, respectively. We also applied this method to investigate the purity of a commercial drug. The results revealed that the ratio between (+)‐ofloxacin and (‐)‐ofloxacin (levofloxacin) was 99.9:0.1, and there is about 93 mg levofloxacin per tablet (200 mg). The concentration of levofloxacin in patient's urine was founded to be 7.9 × 10^?4M, and the ratio between the two optical isomers was 99.3:0.7.     

Synthesis of triphenylene derivatives by Pd-catalyzed Suzuki coupling/intramolecular CH activation between arylboronic acids and dibromobiphenyls

An efficient and regioselective synthesis of functionalized triphenylenes via palladium-catalyzed Suzuki-Miyaura coupling and subsequent intramolecular CH activation between arylboronic acids and dibromobiphenyls was developed. This methodology showed excellent atomic economy and regiospecificity as well as synthetic feasibility of unsymmetrical triphenylenes.     

Synthesis and characterization of new soluble poly（aryl ether nitrile）s containing phthalazinone moiety

A series of novel poly（aryl ether nitrile）s containing phthalazinone moiety were synthesized by the nucleophilic displacement reaction of bisphenol-like monomers （I） with 2,6-difluorobenzonitrile. The inherent viscosities ranged from 0.46 to 1.07 dL g^-1. The glass transition temperatures were in the range of 277-295℃, and the temperatures for 10% weight loss in nitrogen atmosphere were found between 495 and 527 ℃. The structures of these resultant polymers were confirmed by FT-IR and 1^H NMR. Moreover, the properties of poly（aryl ether nitrile）s including solubility and crystallinity were also studied.     

WATER-BLOWN POLYURETHANE RIGID FOAMS MODIFIED BY CHEMICAL PLASTICATION

1. INTRODUCTIONThese years, HCFC-141b may be the most used blowing agent for its useful properties. But, because of its high global warming effect leading to the destruction of the ozone layer, production of HCFC141b has been forbidden. However, there are…     

星状四芳胺类空穴传输材料的合成

有机电致发光器件 (ＯＥＬＤ)是继阴极射线管平板显示器 (ＣＲＴ)和液晶显示器 (ＬＣＤ)之后的第三代平板显示器。它具有主动发光、驱动电压低(2伏左右 )、发光亮度高 (1 3 0 0 0ｃｄ ｍ2 以上 ) ,无软Ｘ 射线污染 ,响应速度快 (1 0 -6 ～ 1 0 -8秒 )等优点。从 1 987年美藉华人邓清云等提出多层结构的ＯＥＬＤ的器件结构以来的十多年间 ,ＯＥＬＤ以及其材料的研究已成为显示技术以及显示材料等方面的研究热点 ,发展很快[1～ 3] 。在 1 999年日本先锋公司已开发出了单色的汽车用ＯＥＬ平板显示器商品 ,今年东芝公司又开发出了 2 .7英寸的彩…     

Preparation ,Structural Characterization and Luminescent Property of Binucleasr Silver（Ⅰ）Complex Formed by Benzotriazole and 1—Hydroxymethyl Benzotriazole

Dinuclear silver (I) six‐membered ring complex [Ag₂ (bta)₂ ‐(hmbta)₂] (ClO₄)₂ (3) has been synthesized by the reaction of benzotriazole (bta) (1) and 1‐hydroxymethyl benzotriazole (hmbta) (2) with Ag (CH₃CN)₄ClO₄. The structures of compound 2 and Complex 3 have been studied by single crystal X‐ray diffraction analysis. The change of luminescent intensity of 1, 2 and 3 was reported. Compound 2 crystallizes in the monoclinic system with space group P2 (1)/c, a = 0.7655 (10) nm, b = 1.0126 (14) nm, c =0.9502 (13) nm, β = 95.07 (2)°, V = 0.7337 (17) nm³ and Z = 4. Complex 3 crystallizes in the triclinic system with space group P1, a = 0.73611 (18) nm, b = 0.9152 (2) nm, c = 1.2277 (3) nm, β = 87.170 (5)°, V = 0.8221 (3) nm³ and Z = 1. The main structural feature of complex 3 is a symmetric dinuclear six‐membered ring formed by two silver (I) atoms and four N‐atoms from two benzotriazoles. The second structural feature of complex 3 is the τ‐τ stacking interaction between two adjacent molecular planes, which forms the two‐dimentional layer structure. Besides, compared with 2, the luminescent intensity of complex 3 shows a remarkable enhancement.     

Cell detection based on protein array using modified glass slides

A protein array for cell detection was fabricated by spotting different antibodies on modified glass slides. Glass slides were modified to allow antibodies to be immobilized on it and to selectively bind antigens. Antibodies were specially selected with the cells to be detected as targets, which permitted target cells in samples to bind specifically to the array with little nonspecific binding. Results can be obtained by directly putting the samples onto the array for 1 h or a little longer to let the cells specifically interact with the antibodies. After washing the unbound samples away, images were observed with a microscope and captured with a CCD camera. The assessment of antibody-cell binding was evaluated by capturing red blood cells (RBCs) in human blood with blood group antibodies (anti-A and anti-B). Blood group antibodies were spotted on the modified glass slide and kept at 4<.deg> degrees C overnight for immobilization. Human blood samples diluted to different concentrations were used to examine the sensitivity and specificity of the method.     

AFM study of hippocampal cells cultured on silicon wafers with nano-scale surface topograph

The rat hippocampal cells were selected as model to study the interaction between the neural cells and silicon substrates using atomic force microscopy (AFM). The hippocampal cells show tight adherence on silicon wafers with nano-scale surface topograph. The lateral friction force investigated by AFM shows significant increase on the boundary around the cellular body. It is considered to relate to the cytoskeleton and cellular secretions. After ultrasonic wash in ethanol and acetone step by step, the surface of silicon wafers was observed by AFM sequentially. We have found that the culture leftovers form tight porous networks and a monolayer on the silicon wafers. It is concluded that the leftovers overspreading on the silicon substrates are the base of cell adherence on such smooth inert surfaces.